How to link a PLU to a Department.

How to link a PLU to a Department.

1. Switch to PGM (Program) mode.
2. Type "3".
3. Press the [SUBTOTAL] button.
4. Type "1166".
5. Press the [SUBTOTAL] button.
6. Type in the desired PLU number.
7. Press the [PLU] button.
8. Type "0000".
9. Type in the 3 digits of the desired Department to be linked to that PLU.
10. Press the [CA/AMT TEND] button.
11. IF you wish to link the next sequential PLU, go to step 8.
12. IF you wish to link a PLU that is out of sequence, go to step 6.
13. IF you wish to leave, press the [SUBTOTAL] button.

Note: Group linking is currently not covered here for simplicity. A group number is the first three "0"s of "0000" ("000 0 000" or "Group 0 Department").


Example:

You want to link PLU number 50 to Department number 50, PLU number 51 to Department number 51, and PLU number 53 to Department number 53. After that you leave. You do the following:

1. Switch to PGM (Program) mode.
2. Type "3".
3. Press the [SUBTOTAL] button.
4. Type "1166".
5. Press the [SUBTOTAL] button.
6. Type "50".
7. Press the [PLU] button.
8. Type "0000".
9. Type "050".
10. Press the [CA/AMT TEND] button.
11. Type "0000".
12. Type "051".
13. Press the [CA/AMT TEND] button.
14. Type "53".
15. Press the [PLU] button.
16. Type "0000".
17. Type "053".
18. Press the [CA/AMT TEND] button.
19. Press the [SUBTOTAL] button.