How to program a Department's price.

How to program a Departement's price.

1. Switch to PGM (Program) mode.
2. Type "1".
3. Press the [SUBTOTAL] button.
4. Type in the desired Department number.
5. Type "04".
6. Press the [SUBTOTAL] button.
7. Type in the desired price of the Department.
8. Press the [CA/AMT TEND] button.
9. IF you wish to set the price of the next sequential Department, go to step 7.
10. IF you wish to set the price of a Department that is out of sequence, go to step 4.
11. IF you wish to leave, press the [SUBTOTAL] button.

Example:

You want to set the price of Department number 150 as "1100", the price of Department number 151 as "5500", and the price of Department number 153 as "27500". After that you leave. You do the following:

1. Switch to PGM (Program) mode.
2. Type "1".
3. Press the [SUBTOTAL] button.
4. Type "50".
5. Type "04".
6. Press the [SUBTOTAL] button.
7. Type "1100".
8. Press the [CA/AMT TEND] button.
9. Type "5500".
10. Press the [CA/AMT TEND] button.
11. Type "53".
12. Type "04".
13. Press the [SUBTOTAL] button.
14. Type "27500".
15. Press the [CA/AMT TEND] button.
16. Press the [SUBTOTAL] button.

How to link a PLU to a Department.

How to link a PLU to a Department.

1. Switch to PGM (Program) mode.
2. Type "3".
3. Press the [SUBTOTAL] button.
4. Type "1166".
5. Press the [SUBTOTAL] button.
6. Type in the desired PLU number.
7. Press the [PLU] button.
8. Type "0000".
9. Type in the 3 digits of the desired Department to be linked to that PLU.
10. Press the [CA/AMT TEND] button.
11. IF you wish to link the next sequential PLU, go to step 8.
12. IF you wish to link a PLU that is out of sequence, go to step 6.
13. IF you wish to leave, press the [SUBTOTAL] button.

Note: Group linking is currently not covered here for simplicity. A group number is the first three "0"s of "0000" ("000 0 000" or "Group 0 Department").


Example:

You want to link PLU number 50 to Department number 50, PLU number 51 to Department number 51, and PLU number 53 to Department number 53. After that you leave. You do the following:

1. Switch to PGM (Program) mode.
2. Type "3".
3. Press the [SUBTOTAL] button.
4. Type "1166".
5. Press the [SUBTOTAL] button.
6. Type "50".
7. Press the [PLU] button.
8. Type "0000".
9. Type "050".
10. Press the [CA/AMT TEND] button.
11. Type "0000".
12. Type "051".
13. Press the [CA/AMT TEND] button.
14. Type "53".
15. Press the [PLU] button.
16. Type "0000".
17. Type "053".
18. Press the [CA/AMT TEND] button.
19. Press the [SUBTOTAL] button.

How to program a PLU's price.

How to program a PLU's price.

1. Switch to PGM (Program) mode.
2. Type "1".
3. Press the [SUBTOTAL] button.
4. Type in the desired PLU number.
5. Type "04".
6. Press the [SUBTOTAL] button.
7. Type in the desired price of the PLU.
8. Press the [CA/AMT TEND] button.
9. IF you wish to set the price of the next sequential PLU, go to step 7.
10. IF you wish to set the price of a PLU that is out of sequence, go to step 4.
11. IF you wish to leave, press the [SUBTOTAL] button.

Example:

You want to set the price of PLU number 50 as "1100", the price of PLU number 51 as "5500", and the price of PLU number 53 as "27500". After that you leave. You do the following:

1. Switch to PGM (Program) mode.
2. Type "1".
3. Press the [SUBTOTAL] button.
4. Type "50".
5. Type "04".
6. Press the [SUBTOTAL] button.
7. Type "1100".
8. Press the [CA/AMT TEND] button.
9. Type "5500".
10. Press the [CA/AMT TEND] button.
11. Type "53".
12. Type "04".
13. Press the [SUBTOTAL] button.
14. Type "27500".
15. Press the [CA/AMT TEND] button.
16. Press the [SUBTOTAL] button.

How to print programs in Program mode 6.

How to print programs in Program mode 6.

1. Switch to PGM (Program) mode.
2. Type "6".
3. Press the [SUBTOTAL] button.
   
4. Type in the desired Program mode.
5. Type in the desired Memory code.
6. Press the [SUBTOTAL] button.
7. Type in the desired starting Address code.
8. Press the [CA/AMT TEND] button.
   
9. Type in the desired ending Address code.
10. Press the [CA/AMT TEND] button.
11. The printer will now start printing.
    
12. IF you wish to stop printing midway, press the [SUBTOTAL] button twice (2X).
13. Wait till the printer finished printing the programs.
14. IF you wish to leave, press the [SUBTOTAL] button.

Example:

You want to print out the programs of Program mode 1 (which contain numerical values, like the prices of the PLUs) on the PLUs (the PLUs reside at Memory code 04), starting from PLU number 1 and ending at PLU number 50. After that you leave. You do the following:

1. Switch to PGM (Program) mode.
2. Type "6".
3. Press the [SUBTOTAL] button.
   
4. Type "1".
5. Type "04".
6. Press the [SUBTOTAL] button.
7. Type "1".
8. Press the [CA/AMT TEND] button.
   
9. Type "50".
10. Press the [CA/AMT TEND] button.
11. Wait till the printer finished printing the programs.
12. Press the [SUBTOTAL] button.

Memory code number 20. (Grand total)

Memory code number 20.
Grand total

Address code 01

Memory codes number 07. (Clerk)

Memory codes number 07.
Clerks

The amount depends on each model, on the SE-S300 it's 50 Clerks.

Each Address is for each Clerk, and its name on the SE-S300 is limited to only 24 characters.

The default name of each PLU is "C>Clerk's number<", for example Clerk number 5 is named as "C05".

Memory code number 05. (Department)

Memory code number 05.
Department

The amount depends on each model, on the SE-S300 it's 200 Departments.

Each Address is for each Department, and its name on the SE-S300 is limited to only 24 characters.

The default name of each Department is "DEPT[>Department's number<", for example Department number 54 is named as "DEPT054".

Memory code number 04. (PLU)

Memory code number 04.
PLU

The amount depends on each model, on the SE-S300 it's 2000 PLUs.

Each Address is for each PLU, and its name on the SE-S300 is limited to only 24 characters.

The default name of each PLU is "PLU>Department's number<", for example PLU number 54 is named as "PLU0054".

The types of keys used to switch modes on Casio cash registers.

The following are the types of keys used to switch modes on Casio cash registers.

OP (Operator) key
Used to access the most basic modes of operation only.

M (Master) key
Used to access some modes of operation.

OW (Owner) key
Used to access most modes of operation.
In some Casio cash registers, it has the same function of as the PGM (Program) key.

PGM (Program) key
Used to access all modes of operation, including the Program mode.

How to program a Department's name.

How to program a Department's name.

1. Switch to PGM (Program) mode.
2. Type "2".
3. Press the [SUBTOTAL] button.
   
4. Type in the desired Department number.
5. Type "04".
6. Press the [SUBTOTAL] button.
7. Type in the desired name of the Department.
8. Press the [CA/AMT TEND] button.
9. IF you wish to name the next sequential Department, go to step 7.
10. IF you wish to name a Department that is out of sequence, go to step 4.
11. IF you wish to leave, press the [SUBTOTAL] button.

Example:

You want to name Department number 50 as "Chaos", Department number 51 as "Super", and Department number 53 as "Stellar". After that you leave. You do the following:

1. Switch to PGM (Program) mode.
2. Type "2".
3. Press the [SUBTOTAL] button.
   
4. Type "50".
5. Type "05".
6. Press the [SUBTOTAL] button.
7. Type "Chaos".
8. Press the [CA/AMT TEND] button.
9. Type "Super".
10. Press the [CA/AMT TEND] button.
11. Type "53".
12. Type "05".
13. Press the [SUBTOTAL] button.
14. Type "Stellar".
15. Press the [CA/AMT TEND] button.
16. Press the [SUBTOTAL] button.

How to program a PLU's name.

How to program a PLU's name.

1. Switch to PGM (Program) mode.
2. Type "2".
3. Press the [SUBTOTAL] button.
   
4. Type in the desired PLU number.
5. Type "04".
6. Press the [SUBTOTAL] button.
7. Type in the desired name of the PLU.
8. Press the [CA/AMT TEND] button.
9. IF you wish to name the next sequential PLU, go to step 7.
10. IF you wish to name a PLU that is out of sequence, go to step 4.
11. IF you wish to leave, press the [SUBTOTAL] button.

Example:

You want to name PLU number 50 as "Super Sonic", PLU number 51 as "Hyper Sonic", and PLU number 53 as "Ultra Sonic". After that you leave. You do the following:

1. Switch to PGM (Program) mode.
2. Type "2".
3. Press the [SUBTOTAL] button.
   
4. Type "50".
5. Type "04".
6. Press the [SUBTOTAL] button.
7. Type "Super Sonic".
8. Press the [CA/AMT TEND] button.
9. Type "Hyper Sonic".
10. Press the [CA/AMT TEND] button.
11. Type "53".
12. Type "04".
13. Press the [SUBTOTAL] button.
14. Type "Ultra Sonic".
15. Press the [CA/AMT TEND] button.
16. Press the [SUBTOTAL] button.

Prefix and suffix of a Casio Cash Register's name.

What the prefix and suffix letters and numbers mean in a Casio Cash Register's name.

Prefix

TE

Usually used by general purpose cash registers, these cash registers are suiteable for general use.

TK
Usually used by cash registers equipped with flat PLU keys or even have all of their keys as flat keys, these cash registers are suiteable for uses in the food service industry.

TK cash registers are usually a variant of their TE counterparts, for example TK-950 is a flat PLU keys equipped TE-900.

SE-S
Newer series of the TE series.
SE-C
Newer series of the TK series.

QT
Multi purposes Point of Sale devices.

Suffix

Menu shifts and departments (usually used for the Japanese market)

4
4 menu shifts for flat PLU keys.

15
15 Departments.

20
20 Departments.

30
30 Departments.

Drawer size

S
Small size drawer.

M
or
MD
Medium size drawer.

Colors (usually used for the Japanese market)

RD
Red.

BK
Black.

SR
Silver.

WE
White.

BU
Blue.

OE
Orange.

Special use (usually used for the Japanese market)

MED
Medical use cash register, capable of printing receipts for drugs prescription.